Bathtub Reglazing in New York City
Licensed & Insured · Free Estimates
Ekopel 2K Bathtub Refinishing
EKOPEL 2K is a European pour-on refinishing material that’s become well known in the U.S. market. It’s valued for its durability and even finish, and it’s a common choice for both professionals and homeowners.
But what exactly is EKOPEL 2K? What sets it apart from other materials? And how do you know if it’s right for refinishing your tub?
A little history on the product
EKOPEL 2K traces back almost 10 years to a laboratory in Slovenia, where its formula was developed from high-quality raw materials. In under a decade it grew into an established manufacturer with global distribution.
Production follows a strict 5-step quality-control process — every stage, from development to packaging to sales, is supervised for consistency.
With an in-house lab, the company can hold its quality standards and develop new formulations as property owners’ needs change.
What exactly is EKOPEL 2K?
EKOPEL 2K is a durable, waterproof coating made to refinish bathtubs, produced from 100% eco-friendly materials — something many homeowners appreciate.
It’s safe and non-toxic, with virtually no smell during application and drying.
What is involved in the refinishing process?
- Warm the bathroom to 75°F for at least 12 hours before starting.
- Clean and prep the tub surface.
- Tape the drain and the tub edges.
- Mix the material by hand and let it set for the specified time.
- Apply it using the pouring method.
- Depending on the formula, spread it with a roller so the whole tub is coated evenly.
- Release any bubbles with a heat gun.
- Remove the tape and protection.
- After 24–36 hours the finish is fully dry — reattach the drain and hardware, and the tub is ready to use.
What are the benefits?
Durability
A solid coating that lasts 7–15 years with proper care. It resists water, mold, mildew, and dirt, so it doesn’t stain easily from water damage.
Appearance
It forms a thick layer for a smooth, dense finish, spreading evenly over the whole tub without bubbles or ridges. It comes in a limited range of colors and resists UV — useful where sunlight hits the tub.
Affordability
Refinishing is far cheaper than replacing — you skip a new tub, removal, disposal, and days of a torn-up bathroom. That said, prices vary and EKOPEL 2K isn’t usually the cheapest brand, so compare options for your budget.
Any drawbacks? EKOPEL 2K’s finish is strong, but some other materials may be even more durable. And because of the eco-friendly ingredients, it tends to cost more than comparable products.
Are there other materials with similar benefits?
Some refinishers use spray-on or brush-on enamel. It’s fairly quick and usually affordable — comparable in cost to EKOPEL 2K and similar systems.
But spray-on enamel is hard and brittle, so it’s prone to cracking and peeling and can wear off quickly. On tubs with more than light cosmetic damage, it won’t fully fill the damage. Dry time can be 5–7 times longer, and it has a strong smell and a less eco-friendly makeup.
Among pour-on materials, there are other comparable brands — ArmoGlaze is one — that apply the same way and offer similar benefits.
Ekopel vs ArmoGlaze: a closer look
Two of the better-known pour-on coatings are Ekopel and ArmoGlaze. Both give durable results — here’s how they compare.
What is ArmoGlaze?
A waterproof pour-on coating built on a polymer blend for a tough, durable surface that resists mold, mildew, and impacts. It’s easy to maintain and known for a strong shine.
What is Ekopel?
A waterproof coating known for its eco-friendly makeup, from sustainable materials that appeal to environmentally minded homeowners. It offers solid water resistance and is easy to clean and maintain.
Endurance
Both resist daily wear, chips, cracks, and peeling for years. Ekopel leans on its eco-friendly formula, ArmoGlaze on its polymer blend — both aim for a long-lasting finish.
Water resistance
Both have non-porous finishes that prevent water damage and staining, so the tub keeps its look over time.
Key differentiators
It comes down to priorities. Ekopel’s edge is its eco-friendly makeup; ArmoGlaze’s focus is its polymer blend, built for hardness and shine.
Cost & value
Both are priced similarly and on the higher side, reflecting their durability. Either way, it’s a better long-term value than repainting.
Both Ekopel and ArmoGlaze are solid pour-on choices. The right one depends on your priorities — Ekopel leans eco-friendly, ArmoGlaze leans on polymer hardness. Either way, you get a durable, even, like-new finish.
See a pour-on refinishing job from start to finish.
Bottom line. Refinishing your tub is a smarter investment than a full replacement. The key to a durable, long-lasting finish is a quality modern pour-on material. Look for durability, a safe, solvent-free application with virtually no smell, and good overall value.
Want your tub reglazed by pros?
We use the pour-on method on cast iron and steel tubs across New York City — done in 3–4 hours, ready in about 24, backed by a 5-year warranty.
Frequently asked questions
What is Ekopel 2K?
It’s a European pour-on bathtub refinishing coating made from 100% eco-friendly materials. It’s durable, waterproof, safe, non-toxic, and has virtually no smell during application and drying.
How long does Ekopel 2K last?
With proper care, a solid 7–15 years. It resists water, mold, mildew, and dirt, so it doesn’t stain easily from water damage — comparable to other quality pour-on coatings.
How is Ekopel 2K applied?
The bathroom is warmed to 75°F for 12+ hours, the tub is cleaned and taped, the material is mixed by hand and poured on (sometimes spread with a roller), bubbles are released with a heat gun, and after 24–36 hours it’s fully dry.
Ekopel vs ArmoGlaze — which is better?
Both are durable pour-on coatings priced similarly. Ekopel leans on its eco-friendly makeup; ArmoGlaze leans on its polymer blend for hardness and shine. The right one depends on your priorities — either gives a long-lasting, even finish.
Is Ekopel 2K better than spray-on enamel?
For durability, yes. Spray-on enamel is hard and brittle, cracks and peels, and won’t fill deeper damage. Pour-on coatings like Ekopel go on thicker and self-level for a smoother, longer-lasting finish — with far less smell.
Is Ekopel 2K expensive?
It’s not usually the cheapest brand — the eco-friendly ingredients push the cost up. But any refinishing is far cheaper than replacing the tub, since you skip a new tub, removal, disposal, and a torn-up bathroom. Compare options for your budget.
