Bathtub Reglazing in New York City
Up to $100 off – valid only until !
Bathtub Reglazing in Union County, NJ
Attention Union County, New Jersey residents: There’s an exciting method for transforming your bathtub that eliminates the need for tearing out and replacing your existing tub. It’s affordable and convenient. It’s eco-friendly and odor-free. And it will make your daily bathing ritual into a tranquil retreat in as little as one day.
What is this amazing process? Bathtub reglazing using the pour-on method.
Your Local Experts for All Types of Fixtures
We use this method on all types of fixtures: conventional tubs, hydro-massage tubs, shower pans and sinks. This restoration process has been used by skilled craftsmen for many years, and residents of Union County, NJ, are thrilled with the results. The transformations are amazing, and even badly damaged tubs can be restored to their original brilliance.
Restoring Tubs in Any Condition
The pour-on material is suitable for bathtubs made of both cast iron and steel that are coated with factory enamel. Even if your tub has previously been refinished with epoxy enamel or a tub insert, this material is a great option to repair the surface and transform it to a snow-white, like-new finish.
We work with tubs that have varying degrees of damage or wear and consistently get outstanding results. Fading, staining, peeling, cracks and chips, can all be restored using this tried and true method.
A Modern Method for a Perfect, Seamless Finish
Because of its pliability and flexibility, this modern material makes it possible to reglaze bathtubs of all shapes and sizes. If you have a non-standard bathtub, replacing it can be quite time-consuming and expensive. Reglazing with the pour-on material is a simple solution that saves you time, money, and hassle.
Our experienced technicians are skilled at applying the material using the pour-on method. It’s self-leveling, so the finish is smooth and uniform without bubbles, ridges, or bare spots.
A Brilliant Finish That Lasts for Years
Best of all, it lasts for years. The finish resists stains and microbes, and it’s easy to keep clean. And it stays as shiny and brilliant as the day it was applied.
Frequently Asked Questions
What is bathtub reglazing?
Bathtub reglazing (also referred to as bathtub resurfacing or refinishing) is like giving an old bathtub a fresh coat of paint to make it look brand new. However, it goes much deeper than just a surface coating. It’s a durable, long-lasting material that restores the original shine and smooth finish to your tub.
Why should I consider bathtub reglazing?
You should consider refinishing because it’s a smarter, faster, and more cost-effective solution than a full replacement. You avoid the high cost and week-long mess of a major demolition.
Our premium pour-on method restores your tub’s surface to a flawless, high-gloss finish that is incredibly durable and, with proper care, can last for 7-15 years. The process is odorless and completed in just a few hours, with the tub ready for use in 24 hours.
What material is used?
We use an advanced liquid acrylic that is specifically designed for bathtub refinishing. Unlike traditional epoxy enamels, our material is odorless, non-toxic, and has near-zero VOCs, making the process perfectly safe for your family and pets.
Once cured, it forms a brilliant, high-gloss finish that is incredibly durable, non-porous, and resistant to impacts and household chemicals. Essentially, you get a beautiful, long-lasting surface without the harsh fumes.
How long does the reglazing process take?
The entire process is quick and convenient, typically taking around 3 hours. More complex jobs might take up to 4 hours.
The material requires about 24 hours to fully dry and harden before you can use your “new” bathtub.
- Minimal mess and disruption to your daily routine.
- Experienced professionals ensure a clean workspace.
How long does the reglazed finish last?
With proper care, your professionally reglazed bathtub will look brilliant for 7 to 15 years.
Our advanced pour-on method creates a thick, durable bond that lasts several times longer than inferior spray-on paints and is highly resistant to peeling and chipping. Following our simple care instructions is the key to maximizing its lifespan.
- Premium Pour-On Method
- Ready in 24 hours
- Odorless
- Premium Pour-On Method
- Ready in 24 hours
- Odorless
- Premium Pour-On Method
- Ready in 24 hours
- Odorless
Additional Services
| SERVICE | COST |
Sliding Shower Door Removal |
$35 |
Caulking |
Free with bathtub service |
Distance surcharge |
(Varies by location, e.g. +$25–$50) |
Spray-On vs. Pour-On: A Clear Comparison
Our premium Pour-On Method provides far greater long-term value and a healthier, odor-free experience. Here's why:
| CRITERIA | Traditional Spray-On Method | Pour-On Application (Our Method) |
| Lifespan | 1-3 years |  7-15 years |
| On-Site Work Time | ~5 hours | 3-4 hours |
| Thickness | 1/160 = 0.15mm | 1/16 inch = 1.5mm |
| Fumes & Odor | Strong, lingering chemical odor | Odorless |
| Toxicity (VOCs) | High | Near-Zero |
| Safety | Requires vacating the home | Safe for family & pets |
| Ready to Use | ~48 Hours | 24 hours |
| Long-Term Value | Lower initial cost, requires frequent re-application | Lasts up to 5x longer, better investment |
Busy property owners don’t have the time and energy for a long, drawn-out restoration project. Removing and replacing a bathtub is no easy task, and it can be costly. In addition, the removal process often damages adjoining walls or floors, dragging out the project even longer.
Bathtub refinishing eliminates all that hassle. Your tub stays intact, and so do the walls and floor. It’s quick and affordable with minimum inconvenience.
The technician works on the surface of the tub without disturbing other fixtures or surfaces. The restored finish makes the tub look like new again, and that gives your whole bathroom an elegant, spa-like feel.
Bathtub reglazing with pour-on enamel takes an average of only 3-4 hours to complete. The surface is cured and ready to use in as little as 24 hours. Imagine the amazing transformation in your bathroom that you can enjoy in just one day!
You’ll be happy to know that pour-on enamel glazing material is also eco-friendly:
-
There is no odor during the application process or after
-
It has a near-zero VOC status
-
It is safe for humans and pets
-
It does not require ventilation during application and you do not have to vacate the premises
-
Reglazing keeps bathroom fixtures out of landfills
Besides being safe and non-toxic, it’s surprisingly strong and durable:
-
It lasts longer than other refinishing methods, such as spray-on enamel
-
It’s impact- and crack-resistant
-
It’s not affected by temperature changes
-
It resists dirt, microbes and stains
-
It’s easy to keep clean without having to use harsh chemicals.
Gallery of Our Transformations
REVIEWS
Our responsive, friendly service and time-tested superior product set us apart in the industry. But don’t just take our word for it—listen to what our clients have to say:
Meet our team of Bathtub Refinishing Specialists in New York:
Service areas in Union County, NJ:
- Elizabeth
- Union
- Linden
- Plainfield
- Rahway
- Westfield
- Scotch Plains
- Clark
- Cranford
- Hillside
Bathtub reglazing with pour-on enamel using the pour-on method is a wise investment. Your tub will stay sleek and elegant for 7-10 years with minimal maintenance. The surface resists microbes, chips, peeling, fading and damage from impacts. We’re so sure that you’ll be satisfied with our work that we offer a 100% money-back guarantee. Call us or click below to get started today. You have nothing to lose…except your old, ugly tub!.
-
Special Limited Time Offer14
days 13
hours 48
minutes -
To Get an Estimate or to Schedule Work
